appqc
Rion UV-16 Dual Channel Charge Amplifier

UV-16 Dual Channel Charge Amplifier/Vibration Meter Unit The dual channel UV-15 can be used with a wide range of CCLD or charge-type accelerometers. Up to 16 units (32 channels) can be linked together. On-board integrators allow the direct measurement of acceleration, velocity or displacement. The UV-16 has a clear backlit display which shows level (as both numeric and a bar graph display) and important measurement parameters including whether the unit is measuring acceleration, velocity or displacement.

  • Two channels with independent settings
  • Wide range of CCLD and charge accelerometers supported sensitivity range 0.1 99.9 mV/ms-2 and 0.1 99.9 pC/ms-2
  • On-board integrators measures acceleration, velocity and displacement
  • 1Hz 15 kHz frequency response 5% (0.5 Hz 30 kHz 10%) for acceleration
  • Standard microdot input sockets
  • Analogue a.c. outputs via industry standard BNC sockets on rear panel
  • Bar graph display with 100msec refresh rate
  • hi-pass filter settings OFF, 10 Hz, 20 Hz, 50 Hz
  • lo-pass filter settings OFF, 1 kHz, 3 kHz, 10 kHz
  • Power supply 9 15V d.c. (12V nominal) via suitable adapter or Battery Unit BP-17 (powers up to 3 units)
  • Resume function memorises all settings at power off and restores them at next power-on