Rion UV-15 Charge Amplifier/Vibration Signal Conditioner/Meter Unit

Features & Benefits

  • Wide range of accelerometers supported (CCLD, TEDS, and charge)
  • 1Hz – 15 kHz frequency response ± 5% (0.5 Hz – 30 kHz 10%) for acceleration
  • Ten hi-pass and ten lo-pass filter points (additional filters available with UV-22)
  • Master/slave function enables simultaneous setting of multiple UV-15s via UV-22

Find Out more

  • View full product specification

    Download PDF
  • Enquire about Purchase

    Purchase Enquiry

    Purchase Enquiry

    Please fill out the enquiry form below and we’ll get back to you quickly.
    • This field is for validation purposes and should be left unchanged.

Product Details

The UV-15 can be used with CCLD, TEDS or charge-type accelerometers. Suitable for single or multichannel (up to 16 channels) use, the UV-15 offers the opportunity to locate the signal conditioning unit close to the sensor or, by using a VP-26A pre-amplifier, the opportunity to operate a charge accelerometer at the end of a long extension cable (standard lengths of up to 100m are available).

Analogue (a.c. or d.c.) and digital (USB or LAN) output (via the UV-22 Interface Unit) outputs available. On-board integrators allow the direct measurement of acceleration, velocity or displacement.

The UV-15 has a clear backlit display which shows level (as both numeric and a bar graph display) and important measurement parameters including whether the unit is measuring acceleration, velocity or displacement rms, equivalent peak or equivalent peak-to-peak.

Contact us

To find out how we can help with your requirements

Send us a message

Contact ANV

  • This field is for validation purposes and should be left unchanged.